Trend

TREND T46/01 X 1/2 TC GUIDED TRIMMER

Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop... [more]

TREND T46/01 X 1/4 TC GUIDE TRIM

Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop... [more]

TREND T46/0 X 1/4 TC GUIDE TRIM

Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop... [more]

TREND T46/1 X 1/4 TC TIPCUT 90DG

Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop... [more]

TREND S60/1 X 1/4 STC HELICAL CUTTER

Solid Tungsten Carbide Helical Cutter gives long lasting super fine finish. Caution: - Use PTFE spray (Trendicote) to enhance the cutter life and... [more]

TREND S55/10 X 1/4 STC ALUMINIUM CUTTER

Solid Tungsten Carbide two flute spiral cutter for the fine finish and long life. For use on non-ferrous metals. Caution: Coolants are required... [more]

TREND S49/23 X 3MM STC BURR & RASP

Solid carbide burrs and rasps for removing welds and burrs in metal, also hand engraving and sculpting wood and metal. Ref S49/20 has no bottom... [more]

TREND S49/2 X 1/4 STC BURR & RASP

Solid carbide burrs and rasps for removing welds and burrs in metal, also hand engraving and sculpting wood and metal. Ref S49/20 has no bottom... [more]

TREND S49/20 X 3MM STC BURR & RASP

Solid carbide burrs and rasps for removing welds and burrs in metal, also hand engraving and sculpting wood and metal. Ref S49/20 has no bottom... [more]

TREND S49/1 X 1/4 STC GRP METAL & WOOD

Ref S49/1 fine cut plunging cutter - end mill cut. Mainly for grinding, carving and shaping of glass, reinforced plastics and phenolics, but also... [more]

TREND S49/01 X 1/4 STC GRP METAL & WOOD

Coarse Cut Plunging Cutter - burr end cut. Mainly used for grinding, carving and shaping of glass reinforced plastics and phenolics, but also... [more]

TREND S48/40 X 1/4 STC SOLID TRIMMER CUTTER

Solid Tungsten Carbide economy trimmers. Ref. S47/70 is for short runs at 90 º or 60 º with an overall length of 32mm. Ref. S48/40 is self guiding... [more]

TREND S47/4 X 1/4 STC PIERCE & TRIM CUTTER

These cutters pierce and cut out aperture in laminate worktops, the base of the cutter acting as a guide follower. Ref S47/4 is solid carbide for... [more]

TREND S47/70 X 1/4 STC SOLID TRIMMER CUTTER

Solid Tungsten Carbide economy trimmers. Ref. S47/70 is for short runs at 90 º or 60 º with an overall length of 32mm. Ref. S48/40 is self guiding... [more]

TREND S11/11 X 1/4 STC ENGRAVING CUTTER

These types of cutters are used for edging, grooving, veining work and chamfer cutting, on man made fibre boards, natural timbers and... [more]