Trend 110 Router

TREND 46/94 X 1/2 TC GUIDED PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 46/95 X 1/4 TC TEMPLATE PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 46/09 X 1/2 TC TEMPLATE PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 46/10 X 3/8 TC TEMPLATE PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 46/03 X 1/2 TC FLUSH TRIMMER CUTTER

Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of Tungsten... [more]

TREND 46/02 X 1/4 TC FLUSH TRIMMER CUTTER

Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of Tungsten... [more]

TREND CRT/10 SPRING PRESSURE CLAMP SET (2)

This Spring Pressure Clamp Set is used with the Trend Router tables. They can be mounted to the back fence to ensure the material is held down... [more]

TREND CRT/3 HOSE ADAPTOR 58MM TO 32MM

Adaptor for Trend router table (5/8mm OD) which enables the Trend hose (CRT/4) to connect to the router fence.... [more]

TREND C149 X 1/4 TC PROFILE SCRIBER

Profile scribed doors in natural timber or medium density fibre board, are traditionally used in cupboards, kitchen doors, drawer fronts and wall... [more]

TREND C150 X 1/4 TC RAISED PANEL

Raised Panel moulder for use in a router table only take 3 or 4 passes at rebated depths. Can be used for curved surfaces if a copy pin is... [more]

TREND GB160 GUIDE BUSH 16MM DIA

Trend guide bushes can be attached to the base of the Router. They are designed to follow the contours of a template.... [more]

TREND TRENDICOTE/60 PFTE SPRAY 60ML

Dry lubricant spray to increase saw blade and router cutter life. Invaluable for preventing build up of resins on metal table surfaces, saw blades... [more]

TREND RT/10 X 1/2 TC 1 BLADE ROTA TIP

Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of Tungsten... [more]

TREND RT/11 X 1/2 TC 1 BLADE ROTA TIP

Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of Tungsten... [more]

TREND RT/11M X 1/2 TC CUTTER RT

Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of Tungsten... [more]