Taylor

TAYLOR F15 FIRMER GOUGE 3/4IN INCANNEL

Standard length in cannel gouge ground with the bevel on the inside giving an outside cutting edge. Blade Length approx. 4in. Fitted with a... [more]

TAYLOR F16 FIRMER GOUGE 1.IN INCANNEL

Standard length in cannel gouge ground with the bevel on the inside giving an outside cutting edge. Blade Length approx. 4in. Fitted with a... [more]

TAYLOR F10 PARING GOUGE 1.1/4 X 6IN INCANNEL

Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade Length approximately. Hardwood... [more]

TAYLOR F6 PARING GOUGE 1/4 X 1/4IN INCANNEL

Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade Length approximately 8in. Hardwood... [more]

TAYLOR F7 PARING GOUGE 1/2 X 5/8IN INCANNEL

Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade Length approximately 8in. Hardwood... [more]

TAYLOR F8 PARING GOUGE 3/4 X 7/8IN INCANNEL

Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade Length approximately 8in. Hardwood... [more]

TAYLOR F9 PARING GOUGE 1. X 1.1/4IN INCANNEL

Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade Length approximately 8in. Hardwood... [more]

TAYLOR F1 PARING GOUGE 1/4 X 1/4IN CRANK NECK

Long narrow blade with cranked neck, allowing the chisel blade to be used flat on the work surface. Cutting edge ground on the inside giving an... [more]

TAYLOR F2 PARING GOUGE 1/2 X 5/8IN CRANK NECK

Long narrow blade with cranked neck, allowing the chisel blade to be used flat on the work surface. Cutting edge ground on the inside giving an... [more]

TAYLOR F3 PARING GOUGE 3/4 X 7/8IN CRANK NECK

Long narrow blade with cranked neck, allowing the chisel blade to be used flat on the work surface. Cutting edge ground on the inside giving an... [more]

TAYLOR F4 PARING GOUGE 1. X 1.1/4IN CRANK NECK

Long narrow blade with cranked neck, allowing the chisel blade to be used flat on the work surface. Cutting edge ground on the inside giving an... [more]

TAYLOR F5 PARING GOUGE 1.1/2X1.3/4INCRANK NECK

Long narrow blade with cranked neck, allowing the chisel blade to be used flat on the work surface. Cutting edge ground on the inside giving an... [more]

TAYLOR HS60 OVAL SKEW CHISEL 1/2IN

Turning Tool with high speed steel blade which gives a finer finish at high speed which cannot be obtained with carbon steel tools. Easy to sharpen... [more]

TAYLOR HS61 OVAL SKEW CHISEL 3/4IN

Turning tool with high speed steel blade which gives a finer finish at high speed which cannot be obtained with carbon steel tools. Easy to sharpen... [more]

TAYLOR HS62 OVAL SKEW CHISEL 1.IN

Turning Tool with high speed steel blade which gives a finer finish at high speed which cannot be obtained with carbon steel tools. Easy to sharpen... [more]