Taper

DORMER E500 HSS MM COARSE TAP 5.0 X 0.80 TPR

Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for... [more]

DORMER E500 HSS MM COARSE TAP 6.0 X 1.00 BOT

Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for... [more]

DORMER E500 HSS MM COARSE TAP 6.0 X 1.00 2ND

Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for... [more]

DORMER E500 HSS MM COARSE TAP 6.0 X 1.00 SET

Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for... [more]

DORMER E500 HSS MM COARSE TAP 6.0 X 1.00 TPR

Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for... [more]

DORMER E500 HSS MM COARSE TAP 7.0 X 1.00 BOT

Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for... [more]

DORMER E500 HSS MM COARSE TAP 8.0 X 1.25 BOT

Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for... [more]

DORMER E500 HSS MM COARSE TAP 8.0 X 1.25 2ND

Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for... [more]

DORMER E500 HSS MM COARSE TAP 8.0 X 1.25 SET

Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for... [more]

DORMER E500 HSS MM COARSE TAP 8.0 X 1.25 TPR

Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for... [more]

DORMER B101 HSS MTS MACHINE REAMER 1.IN

Dormer morse taper shank machine reamer - Spiral flute. Used for opening out and finishing existing holes to H7 tolerance in most ferrous and... [more]

DORMER B101 HSS MTS MACHINE REAMER 12.00MM

Dormer morse taper shank machine reamer - Spiral flute. Used for opening out and finishing existing holes to H7 tolerance in most ferrous and... [more]

DORMER B101 HSS MTS MACHINE REAMER 1/4IN

Dormer morse taper shank machine reamer - Spiral flute. Used for opening out and finishing existing holes to H7 tolerance in most ferrous and... [more]

DORMER B101 HSS MTS MACHINE REAMER 14.00MM

Dormer morse taper shank machine reamer - Spiral flute. Used for opening out and finishing existing holes to H7 tolerance in most ferrous and... [more]

DORMER B101 HSS MTS MACHINE REAMER 15.00MM

Dormer morse taper shank machine reamer - Spiral flute. Used for opening out and finishing existing holes to H7 tolerance in most ferrous and... [more]