Router Bit

TREND 46/90 X 1/4 TC TEMPLATE PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 46/92 X 1/4 TC GUIDED PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 46/94 X 1/2 TC GUIDED PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 46/95 X 1/4 TC TEMPLATE PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 46/09 X 1/2 TC TEMPLATE PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 46/10 X 3/8 TC TEMPLATE PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 46/03 X 1/2 TC FLUSH TRIMMER CUTTER

Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of Tungsten... [more]

TREND 46/02 X 1/4 TC FLUSH TRIMMER CUTTER

Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of Tungsten... [more]

TREND CRT/10 SPRING PRESSURE CLAMP SET (2)

This Spring Pressure Clamp Set is used with the Trend Router tables. They can be mounted to the back fence to ensure the material is held down... [more]

TREND CRT/3 HOSE ADAPTOR 58MM TO 32MM

Adaptor for Trend router table (5/8mm OD) which enables the Trend hose (CRT/4) to connect to the router fence.... [more]

TREND C149 X 1/4 TC PROFILE SCRIBER

Profile scribed doors in natural timber or medium density fibre board, are traditionally used in cupboards, kitchen doors, drawer fronts and wall... [more]

TREND C150 X 1/4 TC RAISED PANEL

Raised Panel moulder for use in a router table only take 3 or 4 passes at rebated depths. Can be used for curved surfaces if a copy pin is... [more]

DEWALT DE6273 COLLET 6.35MM (1/4IN)

6.35mm (1/4in) Collet to fit DEW625EK Router.... [more]

DEWALT DE6274 COLLET 8.00MM

8mm Collet to fit DEW625EK Router.... [more]

DEWALT DE6275 COLLET 9.52MM (3/8IN)

9.52mm (3/8in) Collet to fit DEW625EK Router.... [more]