Pilot

MONUMENT 1843P 6TPI ONE PIECE HOLESAW 54MM

This holesaw can be used on stainless steel, cast iron, mild & galvanised steel, aluminium, copper, brass, plastics and wood. Made with M42 cobalt... [more]

MONUMENT 1844S 6TPI ONE PIECE HOLESAW 57MM

This holesaw can be used on stainless steel, cast iron, mild & galvanised steel, aluminium, copper, brass, plastics and wood. Made with M42 cobalt... [more]

MONUMENT 1859M 6TPI ONE PIECE HOLESAW 73MM

This holesaw can be used on stainless steel, cast iron, mild & galvanised steel, aluminium, copper, brass, plastics and wood. Made with M42 cobalt... [more]

BAHCO 3834-DRL PILOT DRILL

... [more]

ULTRA G.P PIPE & CONDUIT ENTRANCE H/SAW KIT

General Purpose Pipe and Conduit Holesaw Kit. Contains. SC16, 21, 25, 32, 40 and 51 Holesaws. SC1 and SC3 Arbors. 1 SC6 Pilot Drill. 1 SC11... [more]

ULTRA SC1 MANDREL & PILOT (14-30MM)

Model SC1 Arbor with 1/4in Pilot Drill. Has a 1/4in Diameter Chuck Drive. For use with holesaws up to 30mm. (Replacment Pilot Drill is... [more]

DISSTON D5666 HOLE IN ONE SOFFIT CUTTER 70MM

This all in one cutter has the 4/6 varipitch tooth design, the shank is welded on to the back plate. Ideal for cutting holes in plywood, metal,... [more]

PRIORY 400 TANK CUTTER FOR H.BRACE/DRILL STAND

This Tank Cutter has a straight shank with 3 flats upon it to ensure a positive drive when used in 3 jaw chuck. This Tank Cutter is suitable for... [more]

PRIORY 201/C STRAIGHT SHANK TANK CUTTER 4IN

This Tank Cutter has a staight shank with a hardened carbon steel cutter blade and separate high speed steel pilot drill. Suitable for use on most... [more]

PRIORY 202B BIT STOCK TANK CUTTER 4.1/2IN

This Tank Cutter has a bit shank suitable for use in a carpenters brace, a hardened carbon steel cutting blade and high speed steel pilot... [more]

HALL BSE1 BRADRAD 1/4-1.1/2IN WITH 10MM SHANK

S type Bradrads are used to machine a wide variety of materials and for many different applications. No pilot-hole is required, and good quality... [more]

HALL BSM2 BRADRAD TOOL 6-36MM WITH 10MM SHANK

S Type Bradrads are used to machine a wide variety of materials and for many different applications. No pilot-hole is required, and good quality... [more]

HALL BSM4 BRADRAD TOOL 7-37MM WITH 10MM SHANK

S Type Bradrads are use to machine a wide variety of materials and for many different applications. No pilot-hole is required, and good quality... [more]

HALL BSM6 BRADRAD TOOL 8-38MM WITH 10MM SHANK

S Type Bradrads are used to machine a wide variety of materials and for many different applications. No pilot-hole is required, and good quality... [more]

ULTRA SD3 SDS MANDREL

Model SD3 Arbor with 1/4in Pilot Drill. Also has two driving pins to spread the load. SDS Driving Shank. For use with Holesaw Sizes from 1.1/4in... [more]