Britool

BRITOOL E91 UNIVERSAL JOINT 1/2INSQDR

Short coupled linkage, universal joint. Can be used with all Britool 1/2in Square Drive accessories in any position in an assembly. Length. 70mm... [more]

BRITOOL E79 SWIVEL HANDLE 16IN 1/2INSQDR

1/2in Square Drive Swivel Handle. With hinged link permitting operation at varying angles. Handle Type. Polypropylene. Length. 400mm -... [more]

BRITOOL E85 SWIVEL HANDLE 18IN 1/2INSQDR

1/2in Square Drive Swivel Handle. With hinged link permitting operation at varying angles. Handle Type. Polypropylene. Length. 468mm -... [more]

BRITOOL E86 SWIVEL HANDLE 24IN 1/2INSQDR

1/2in Square Drive Swivel Handle. With hinged link permitting operation at varying angles. Handle Type. Polypropylene. Length. 620mm -... [more]

BRITOOL E77 ROLLER CLUTCH RATCHET 1/2INSQDR

Clutch Ratchet. Movement - less than 1 degree ratcheting movement can be achieved, ideal for confined areas. Mechanism - simple and robust gives... [more]

BRITOOL E75 RATCHET HANDLE QUICK/REL. 1/2INSQDR

Quick release reversible ratchet. Thumb Lever - Instantly reversible without removing the socket. Powerful - 40 tooth ratchet mechanism. Quick... [more]

BRITOOL E74 RATCHET HANDLE 1/2INSQDR

1/2in Square Drive Reversible Ratchet. Thumb lever - instantly reversible without removing the socket. Powerful - 40 tooth ratchet... [more]

BRITOOL DP20 FINE TOOTH RATCHET 1/4IN SQDR

A polypropylene handle fine tooth ratchet, to compliment the 1/4in square drive range of sockets. Length 124mm 1/4in Square Drive... [more]

BRITOOL D93 FLEXIBLE EXTENSION 1/4IN SQDR

For reaching difficult positions. The flexible steel cable shaft is suitable for right or left hand drive. 1/4in Square Drive. Length. 152mm -... [more]

BRITOOL D70 SLIDING OFFSET HANDLE 1/4IN SQDR

Has removable sliding bar enabling an accessory to be used with varying leverage or operated in a restricted space. 1/4in. Square Drive Length.... [more]

BRITOOL D50 SPINNER HANDLE 1/4IN SQDR

Ideal for fast nut spinning can be used with most Dwarf sockets and most accessories. Shockproof handle. 1/4in Square Drive. Length: 152mm - 6in... [more]

BRITOOL D46 LEVER REVERSIBLE RATCHET 1/4IN SQDR

A polypropylene handle ratchet with lock-on, to compliment 1/4in square drive range of sockets. Length 150mm 1/4in Square Drive... [more]

BRITOOL D45 LEVER REVERSIBLE RATCHET 1/4IN SQDR

A steel handle ratchet to compliment the 1/4in square drive range of sockets. Length 140mm 1/4in Square Drive... [more]

BRITOOL AVT100A TORQUE WRENCH 3/8IN SQDR

Required torque loads are set by turning the sleeve until the required setting is opposite the mark. All Britool torque wrenches indicate with... [more]

BRITOOL AVT300A TORQUE WRENCH 3/8IN SQDR

Required torque loads are set by turning the sleeve until the required setting is opposite the mark. All Britool torque wrenches indicate with... [more]