Long

Faithfull ASH T HANDLE BENT BLUNT 28IN

A 28in long handle with a wooden T shaped grip. Bent along its length but not tapering at the end (blunt).... [more]

Faithfull ASH T HANDLE BENT TAPER 28IN

A replacement handle 28in long and fitted with a wooden T shaped grip. Handle is bent along its length and tapered at the end.... [more]

Faithfull HEX KEY SET (9) A/F - LONG ARM

Professional quality keys made from fully hardened chrome vanadium steel. All keys from 1/8in have chamfered edges to prevent damage to blade and... [more]

Faithfull 36/200 BENT LONG NOSE PLIER 8IN

Bent Nose Plier. Long half round section gripping jaws for forming loops with wire or thin strips of metal. Hardened cutting edges. Length.... [more]

Faithfull BSU-VDE LONG NOSE PLIER 8IN

Faithfull VDE pliers are made from chrome vanadium steel and undergo stringent high voltage tests. The quality of the insulated slip-guard safety... [more]

Faithfull LEATHER CHISEL ROLL - 8 POCKET

Made from water resistant, high quality suede leather which is double stitched at stress points. Has a long ribbon tie. Suitable for Chisels and... [more]

Faithfull HEX KEY SET (9) METRIC LONG ARM BALLEND

Hexagon Keys are six sided wrenches for driving socket screws which are used mostly on machinery for fastening parts tightly together. Fully... [more]

Faithfull HEX KEY SET (9) A/F LONG ARM BALLEND

Hexagon Keys are six sided wrenches for driving socket screws which are used mostly on machinery for fastening parts tightly together. Fully... [more]

TAYLOR F10 PARING GOUGE 1.1/4 X 6IN INCANNEL

Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade Length approximately. Hardwood... [more]

TAYLOR F6 PARING GOUGE 1/4 X 1/4IN INCANNEL

Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade Length approximately 8in. Hardwood... [more]

TAYLOR F7 PARING GOUGE 1/2 X 5/8IN INCANNEL

Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade Length approximately 8in. Hardwood... [more]

TAYLOR F8 PARING GOUGE 3/4 X 7/8IN INCANNEL

Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade Length approximately 8in. Hardwood... [more]

TAYLOR F9 PARING GOUGE 1. X 1.1/4IN INCANNEL

Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade Length approximately 8in. Hardwood... [more]

TAYLOR F1 PARING GOUGE 1/4 X 1/4IN CRANK NECK

Long narrow blade with cranked neck, allowing the chisel blade to be used flat on the work surface. Cutting edge ground on the inside giving an... [more]

TAYLOR F2 PARING GOUGE 1/2 X 5/8IN CRANK NECK

Long narrow blade with cranked neck, allowing the chisel blade to be used flat on the work surface. Cutting edge ground on the inside giving an... [more]