Combination Oil

FISCO 53ME COMBINATION SQUARE 12IN/30CM

Heavy duty combination square for use as outside and inside try square, mitre square, depth and marking gauge, steel rule, straight edge, spirit... [more]

FISHER F411ME SQUARE 6IN WITH ALLY BLADE

This combination square can be used as an outside and inside try square as well as a mitre square. It can also be used as a depth and marking... [more]

FISCO 58ME COMBINATION SQUARE 12IN/30CM

Heavy duty combination square for use as outside and inside, try square, mitre square, depth and marking gauge, steel rule, straight edge, spirit... [more]

FISCO 52ME COMBINATION SQUARE 12IN/30CM

Standard multi-purpose square for use as outside and inside try square, mitre square, depth and marking gauge, steel rule, straight edge,spirit... [more]

FISHER FB295ME ANGLE FINDER 12IN BLISTER

This highly versatile combination square has all the uses of a standard combination square, reads any angle instantly, checks through horizontal... [more]

FISHER FB1953ME COMB SQUARE 12IN BLISTER

This multi-purpose combination square has a heavy-duty cast iron dtock with ground faces. It can be used as an outside or inside try square, a mitre... [more]

WISS M-41R METALMASTER PIPE AND DUCT SNIP

M-41R cuts straight, curves and any combination. The M-41R is formed of high carbon steel. The handles are formed of special high strength steel and... [more]

INDIA IB24 COMB STONE 100X25X13MM

Designed specially for use by carpenters and mechanics. Combination stones are made with one face coarse or medium, and one face of fine cut. The... [more]

TREND 47/4 X 1/4 TC PIERCE & TRIM CUTTER

Combination pierce and trim cutters, these cutters pierce and cut out aperture in laminate worktops. The base of the cutter acting as a guide... [more]

TREND 46/49 X 1/2 TC ELEGANT MOULD OGE

These cutters are used extensively in the furniture and cabinet making trades to cut edge and face mouldings in natural timbers and man-made... [more]

Lock and Load 90591 COMBINATION BIT SET 19PCE

Lock n Load quick change set. For use with the quick release chuck system. Set consists of : HSS Drill Bits 1/16in , 1/8in, 3/16in, & 1/4in ... [more]

BRITOOL ND251D Combination Spanner SET (14) 3/8-1.1/4AF

This combination wrench set of 14 spanners have a broached ring at one end and an open jaw at the other, with both ends the same size. The jaw and... [more]

MARPLES M2153 MORTICE GAUGE

This combination mortice and marking gauge is made of sealed rosewood and has a brass pull slide to adjust the extra spur for use as a mortice... [more]

PRIORY 320 WHIT PODGER SCAFFOLD SPANNER 1/2IN

The Combination Scaffold Spanner which has a hardened and tempered handle which has a taper and square end. Suitable for use on scaffold eye... [more]

PRIORY 320 WHIT PODGER SCAFFOLD SPANNER 7/16IN

The Combination Scaffold Spanner which has a hardened and tempered handle which has a taper and square end. Suitable for use on scaffold eye... [more]