T

TREND UNI/CS COUNTERSINK

This TCT Countersink clamps onto any drill between 3mm and 7.2mm in diameter. The drill passes through the body of the countersink and is secured by... [more]

TREND SP-46/02D TORX SCREW

Replacement Torx Screws for ROTATIP replacement cutters. We recommend you use genuine Trend Torx Screws when replacing screws.... [more]

TREND QUAD GROOVER SET 1/2IN

This versatile 1/2in shank groover set offers an infinitely varible grooving width and jointing facility with a self guided bearing option. It... [more]

TREND PB22 PLANER BLADE 82MM

Trend solid carbide planer blades fit portable electric planers and are supplied in pairs. They have two cutting edges and are reversible, giving... [more]

TREND PB25 PLANER BLADE 80MM

Trend solid carbide planer blades fit portable electric planers and are supplied in pairs. They have two cutting edges and are reversible, giving... [more]

TREND PB27 PLANER BLADE 92MM

Trend solid carbide planer blades fit portable electric planers and are supplied in pairs. They have two cutting edges and are reversible, giving... [more]

TREND PB28 PLANER BLADE 75MM

Trend solid carbide planer blades fit portable electric planers and are supplied in pairs. They have two cutting edges and are reversible, giving... [more]

TREND PB29 PLANER BLADE 82MM

Trend solid carbide planer blades fit portable electric planers and are supplied in pairs. They have two cutting edges and are reversible, giving... [more]

TREND BSC/0/ 100 BISCUITS

Biscuit joining has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition... [more]

TREND BSC/20/100 BISCUITS

Biscuit joining has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition... [more]

TREND BSC/20/1000 BISCUITS

Biscuit joining has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition... [more]

TREND ARBOR-STANDARD DUTY 33/60 X 1/4

For use with Tend Bearings and Slotters. 1/4in Shank.... [more]

TREND ARBOR FOR GROOVER 33/20 X 1/2

Arbor to fit Groover Slotter No.34/03. This Arbor allows grooves to be cut totally finish in recess. M12 Threaded x 1.0 12mm Bore.... [more]

TREND 5/52 X 1/2 TC MORTISER

Tungsten Carbide cutters with staggered cutting surfaces. For deep mortising and grooving giving good chip clearance. Take several passes to... [more]

TREND 5/53 X 1/2 TC MORTISER

Tungsten Carbide cutters with staggered cutting surfaces. For deep mortising and grooving giving good chip clearance. Take several passes to... [more]