T

TAYLOR WOODCARVING CRAFTSMEN SET 12

The craftsmen set has slightly smaller 3.1/2in blade tools which make ideal gifts and are from the amateur range.Designed to provide the beginner... [more]

TAYLOR HSS TURNING TOOLS SET 8

Set of 8 HSS full size Professional Turning Tool Set . Set consists of :- 3/4in Deep Fluting Gouge. 1/4in Turning Gouge. 1/2in Turning... [more]

THOR 1010 DEAD-BLOW NYLON HAMMER 1.LB

The ideal hammer for effective blows. The hollow die-cast head is partially filled with steel shot which adds to the weight, prevents rebound and... [more]

THOR 1212 DEAD-BLOW NYLON HAMMER 1.1/2LB.

The ideal hammer for effective blows. The hollow die-cast head is partially filled with steel shot which adds to the weight, prevents rebound and... [more]

THOR 1414 DEAD-BLOW NYLON HAMMER 2.LB.

The ideal hammer for effective blows. The hollow die-cast head is partially filled with steel shot which adds to the weight, prevents rebound and... [more]

THOR 1616 DEAD-BLOW NYLON HAMMER 2.3/4LB

The ideal hammer for effective blows. The hollow die-cast head is partially filled with steel shot which adds to the weight, prevents rebound and... [more]

THOR 2020 DEAD-BLOW NYLON HAMMER 4.1/4LB

The ideal hammer for effective blows. The hollow die-cast head is partially filled with steel shot which adds to the weight, prevents rebound and... [more]

TREND 46/91 X 1/4 TC TEMPLATE PROFILER

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided... [more]

TREND 3/50 X 1/4 TC TWO FLUTE CUTTER

Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and... [more]

THOR 952W WHITE RUBBER MALLET 2.1/8IN

Tough durable semi-hard white rubber mallet with cylindrical head of special rubber mix. Will not discolour or leave marks on work surfaces and... [more]

THOR 953W WHITE RUBBER MALLET 2.1/2IN

Tough durable semi-hard white rubber mallets with cylindrical heads of special rubber mix. Will not discolour or leave marks on work surfaces and... [more]

THOR 954W WHITE RUBBER MALLET 3 IN

Tough durable semi-hard white rubber mallet with cylindrical head of special rubber mix. Will not discolour or leave marks on work surfaces and... [more]

THOR 957W WHITE RUBBER MALLET 3.1/2IN

Tough durable semi-hard white rubber mallet with cylindrical head of special rubber mix. Will not discolour or leave marks on work surfaces and... [more]

THOR 951 BLACK RUBBER MALLET 1.1/2IN

For general industrial use, these semi-hard black rubber mallets give a gentle but firm blow with little rebound. Ideal for use under damp... [more]

THOR 952 BLACK RUBBER MALLET 2.1/8IN

For general industrial use, these semi-hard black rubber mallets give a gentle but firm blow with little rebound. Ideal for use under damp... [more]