T

TREND 3/9 X 1/4 TC TWO FLUTE CUTTER

Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and... [more]

TREND 346 X 1/2 TC INTUMESCENT RECESSING SET

The trend recessing cutter Set, used with any heavy duty router, neatly cuts grooves on doors or frames to accept intumescent strip. This enables... [more]

TREND 342 X 1/2 TC BISCUIT JOINTER

342 Biscuit Jointer Set enables biscuit Jointing timber, man-made fibre and particle board with the router. The set includes three sizes of... [more]

TREND 342 X 1/4 TC BISCUIT JOINTER

342 Biscuit Jointer Set enables biscuit Jointing timber, man-made fibre and particle board with the router. The set includes three sizes of... [more]

TREND 2/01 X 1/4 TC ONE FLUTE CUTTER 1.5MM

These cutters are suitable for grooving, rebating, mortising & drilling, the single flute cutters offer fast free cutting. If you require a cleaner... [more]

TREND 12/5 X 1/4 HSS RADIUS CUTTER

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products... [more]

TREND 12/5 X 1/4 TC RADIUS CUTTER

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products... [more]

TREND 12/6 X 1/4 HSS RADIUS CUTTER

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products... [more]

TREND 12/6 X 1/4 TC RADIUS CUTTER

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products... [more]

TREND 12/7 X 1/4 HSS RADIUS CUTTER

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products... [more]

TREND 12/7 X 1/4 TC RADIUS CUTTER

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products... [more]

TREND 11/3 X 1/2 TC CHAMFER CUTTER

Chamfer V grooving cutters are used for bevelling, chamfering and producing motar grooves. Due to design an approx. 1.0mm flat will be found on... [more]

TREND 11/3 X 1/4 HSS V GROOVE CUTTER

These types of cutters are used for edging, grooving, veining work and chamfer cutting, on man made fibre boards, natural timbers and... [more]

TREND 11/3 X 1/4 TC V GROOVE CUTTER

These types of cutters are used for edging, grooving, veining work and chamfer cutting, on man made fibre boards, natural timbers and... [more]

TREND 4/70 X 1/2 TC TWO FLUTE CUTTER

Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and... [more]